Lyngdorf CD 2

Listino: 2.399,00
prezzo consigliato al publico, iva inclusa


Disponibile solo in finitura
Aluminium Black

Condividi questo prodotto con i tuoi amici:

Progettato, sviluppato e prodotto in Danimarca, il lettore audio Lyngdorf  CD-2 fornisce le prestazioni insuperabili che ci si aspetta da un prodotto Lyngdorf Audio. Sviluppato con l'esperienza acquisita dai pluripremiati amplificatori digitali Lyngdorf Audio, questo lettore è uno dei migliori lettori CD audio dal suono puro sul mercato.

Il Lyngdorf CD-2 è stato progettato per la sola riproduzione audio, e per questo motivo, utilizzando una meccanica di lettura solo audio è al tempo stesso più semplice e migliore. Tutte le unità multi-formato si basano su progetti video e clock, l'uscita audio è poi ri-campionata in modo incontrollato per il clock della conversione. Molti scelgono di ottimizzare il clock sul disco stesso, ma non importa quello che fai, i potenziali di terra sono difficili da controllare così come quello della scheda di controllo del motore ed il rumore che inducono.

La filosofia Lyngdorf Audio è quello di ottenere il segnale audio più pulito possibile e per fare l'ottimizzazione basata sul sistema di clock di precisione Lyngdorf Audio. Sulla base di precedenti lavori, lettore CD e amplificatori completamente digitali, sappiamo cosa fare e cosa non fare dei sistemi di clock. Per il CD-2, abbiamo preso il clock dal Millennium Mk IV e lo abbiamo inserito nel Lyngdorf CD-2. La chiave è il basso rumore di fase in banda audio.

 

PURE AUDIO CD

CD-2 Front_angle

The CD-2 is designed for audio only, and for this reason, using a pure audio drive is both simpler and better. All multi-format drives are based on video designs and clocks, and the audio output is then re-sampled (uncontrolled) to audio output clocks. Many choose to optimize the clock on the drive itself, but no matter what you do, ground potentials are difficult to control and the engine control board is noise-inducing.

The Lyngdorf Audio philosophy is to get the audio signal as clean as possible and to do the optimization based on the Lyngdorf Audio precision clock system. Based on previous work with CD players and fully digital amplifiers, we know the do’s and don’ts of clock systems. For the CD-2, we have taken the clock from the Millennium Mk IV and implemented it into the CD-2. The key is low phase noise in the audio band.

ICC - INTERSAMPLE CLIPPING CORRECTION

When music is being mastered, the level is often very high; upon analysis you will often find several consecutive maximum samples, indicating something has been clipped away from the original signal. Audio that exceeds 0 dBFS (decibels relative to full scale) will sound very compressed because the headroom is nonexistent. Sadly, this harsh sound is often related to digitally stored music, as compared to the sound of vinyl. In the CD-2 we reduce the gain with 3 dB; thus, you will enjoy the full dynamic range and a more distortion-free sound.

ELECTRICAL DESIGN

CD2 back_angle

The Lyngdorf Audio designed switch mode power supply is extremely well regulated and is filtered and decoupled to provide a low noise and low impedance supply to the digital and analog circuitry. With different supplies from four independent secondary windings on the transformer, the analog and digital supplies are kept separate to minimize digital noise in the analog circuit.

Grounding is optimal, and the entire chassis is connected electrically. The back panel is electrically conductive.

Lyngdorf Audio spends great time and effort in designing products that will not radiate noise. Making a noise and radiation free design has the advantage that it will also make the CD-2 itself immune to noise from the outside and from products that have not had the same attention to details in the design phase.

D/A CONVERTER

The D/A converter section (also used in the Millennium Mk IV) is used to drive a high-quality, single ended, and balanced output stage. The D/A converter is built around the Wolfson WM8740 chip. This, in combination with our balanced design and very fine audiophile op-amps, results in outstanding sonic qualities.

SAMPLE RATE CONVERTER

Resampling the output of the CD drive to a low-noise clock suppresses the level of jitter artifacts in the output signal to an absolute minimum. Our state-of-the-art sample rate converters, using special low-noise design techniques, enable the CD-2 to upsample the digital output of the audio drive to a selectable output rate. A major advantage of this is that you can adjust the output for the optimum operating point of a D/A converter. The digital output can deliver 24-bit resolution at a sample rate up to 192 kHz. The analog output section is upsampled in a parallel process to 96 kHz. 

SPECIFICATIONS

Outputs   

1 x Coaxial Digital (galvanic isolated)
1 x Optical Digital
1 x Analog Single Ended RCA
1 x Analog Balanced XLR
 

 
Frequency Response   20 – 20k Hz, +/- 0.02dB
 
 
THD + N   0.0018%
 
 
Sample rates   44.1kHz,16 bit
48/96/192kHz,24 bit
 
 
Dimensions HxWxD  

5.8 x 45.0 x 37.5 cm* 
2.3 x 17.7 x 14.8 in*
*incl front knob and connectors
 

 
Finish  

Anodized aluminum, matte black 

 
Weight  

6.1 kg 
13.5 lb

Al momento non è disponibile nessuna materiale da scaricare collegato al prodotto. Torna a trovarci periodicamente!

Al momento non è presente nessuna recensione. Torna a trovarci presto!


Lyngdorf CD 2. Cosa ne pensi? Lascia un commento!

//

XFAudio

Riviera Tiso da Camposampiero, 28
35123 Padova (PD)

Tel. (+39) 049 876 6571
Fax. (+39) 049 210 6892

// Seguici anche sui Social Network